In The Swim Granular Pool pH Increaser - 25 Pound Bucket


In The Swim Granular Pool pH Increaser - 25 Pound Bucket by In The Swim at Crystal Springs NC. MPN: Y7020. Hurry! Limited time offer. Offer valid only while supplies last. In the Swim Granular Pool pH Increaser is easy-to-use and dissolves fast. Maintaining proper pH balance is the key to maintaining healthy pool water. pH balance is how acidic or basic the water is. The pH scale is 0-14, residential and commercial pool/spas should be between 7.2 - 7.6 with an ideal of 7.4. If the pH balance fluctuates too high or low, you may experience negative side effects. The side effects of low pH balance can vary. It may lower the effectiveness of chlorine, create corrosive


In The Swim Granular Pool pH Increaser - 25 Pound Bucket by In The Swim
4.0 out of 5 stars with 32 reviews
Condition: New
Availability: In Stock
$47.99


Quantity:  

 


Product Description & Reviews

In the Swim Granular Pool pH Increaser is easy-to-use and dissolves fast. Maintaining proper pH balance is the key to maintaining healthy pool water. pH balance is how acidic or basic the water is. The pH scale is 0-14, residential and commercial pool/spas should be between 7.2 - 7.6 with an ideal of 7.4. If the pH balance fluctuates too high or low, you may experience negative side effects. The side effects of low pH balance can vary. It may lower the effectiveness of chlorine, create corrosive water, etching of the interior and irritation of your skin and eyes. Etching can make the interior feel rough and uncomfortable. Low pH causes red eyes, dry skin, and dry damaged hair. If you swim in a pool that has a low or high pH, make sure to rinse off in the shower immediately. Side effects of high pH balance can also vary. It may cause scaling of the interior pool surface, plumbing, and equipment. Scale build-up can cause poor water circulation and low flow rates. The interior will become very rough and uncomfortable. The water can even look cloudy due to high pH balance. The first step to maintaining proper pH is completing a water test. Water can be tested with a DPD/OTO droplet test kit, water test strips, or digital testing. Once a water test has been completed, we want to start with alkalinity. Alkalinity is a buffer for the pH. Start by adjusting your alkalinity to a level between 80-120ppm*. Once your alkalinity is within range, we can start adjusting pH. Now, re-test the water. If the pH is below 7.2, please add 1 lb per 10,000 gallons (Don't add more that 4 lbs at a single time). Measure out the suggested product amount per water volume. Add the pH increaser to a chemical-safe container and mix with at least 1 gallon of water to dissolve. Pour the mixture around the perimeter of the pool. The circulation system should be running during this process. Test the water again after 3-4 hours. Repeat as needed until pH is in desired range. Parts Per Million*

Features & Highlights

  • Raises pool water pH levels by neutralizing water acidity
  • Reduces eye and skin irritation by neutralizing water acidity
  • Slows the rapid dissipation of chlorine caused by acidic water
  • 100% Sodium Carbonate (Soda Ash)
  • Initial Dosage: 1 lb. per 10,000 gallons

Additional Information

Brand:
In The Swim
Manufacturer:
In The Swim
Category:
Pool Balancers
MPN:
Y7020
Part Number:
Y7020
Publisher:
In The Swim
Package Weight:
20 pounds
Package Size:
13 x 13 x 13 inches

 


Have questions about this item (Y7020), or would like to inquire about a custom or bulk order?


If you have any questions about this product by In The Swim, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


mpn: PCAL-40, ean: 0632272800837,
Bare Ground CalPlus brings your soft pool water to a normal calcium hardness level. It helps prevent corrosion, etching, and pitting of concrete surfaces as well as preventing the damage to pool and equipment caused by soft water. Simply scatter over...

mpn: Y7320,
In The Swim Pool Alkalinity Increaser is a fast dissolving, easy to use powder for all types of pools and spas. Proper Alkalinity and pH balance is key to maintaining healthy pool or spa water. Alkalinity helps to stabilize the pH balance in your poo...

mpn: 1-2210B-02, ean: 0034261221027,
Test for pH with a reliable test kit. If the pH is low (7.2 or below) add this product according to the guide below. Pre-dissolve this product in a plastic pail and slowly pour around the perimeter of the swimming pool while the circulation system is...

mpn: ALK-04, ean: 0034261110413,
Alkalinity is critical to pH control, this granular formula effectively raises alkalinity levels. Low alkalinity levels can cause equipment corrosion, pH bounce and water discoloration. Compatible with chlorine, bromine, ozone and biguanide sanitizer...